GULF 911 OIL 15W50 for 964 / 911 Carrera 2/4 • 1993 • 964 carrera 2 • Coupe • Automatic gearbox
-
Reference :
P1008231
-
Series selected :
964 / 911 Carrera 2/4
-
Model selected :
1993 - 964 carrera 2
-
Section :
Engine and fuel feed > Engine oil
-
Recommended :
1
-
Weight :
3.94 kg
-
Dimension :
4 LITRES
-
Comments :
Gulf 911 15W-50 –100% Synthetic Motor Oil for PORSCHE - Air Cooled Horizontally engine (Flat Six Engine) Gulf Special Oils Series Description, To fit the oil to the type of the car can lead the maximum intrinsic performance of the engine and as the result, could extend the engine life. Gulf's technologies developed during its long history could realize the creation of the dedicated oil series by the type of cars which ensure the best matching with the car. This series of oil are suitable to the engines from normal to fine tuned and to cars from city driving to circuit driving. Product Description • Gulf 911 15W-50 is a special blend oil dedicated to air-cooled horizontal, six-cylinder engines with a proven backbone of the Porsche air-cooled racing engine. • The Porsche 911 narrow model released in 1965 continues to evolve to 930, 964, and 993 models, and its engine specs have achieved tremendous performance to 3.6 L twin-turbo 430s (GT2). The ultimate pursuit of oil to satisfy its engine evolution is the Porsche-only engine oil Gulf 911 15W-50. • The Gulf 911 15W-50 is a 100% chemical synthetic Oil of PAO + Ester. PAO is excellent in heat resistance and protect the effect of moisture caused by the combustion of gasoline, and Ester is excellent in lubricating and protecting metal surface. • SAE 15W-50 viscosity grade setting ensures excellent engine protection, oil film is retained even in high-rpm areas. • The oil temperature rise of the air-cooled engine may increase at an accelerated rate, but Gulf oil retains stable hydraulic pressure even under severe condition of high temperatures. Features & Benefits • Sharp response to high rotation, engine pickup in all areas of driving, feeling of blowing up to the red zone at once, Gulf 911 was developed to drivers feel unique engine characteristics of Porsche. • The Gulf 911 provides a linear torque feel specific to the air-cooled engine while maintaining a strong oil film even high temperature. • The change in the clearance of cylinders, pistons, and piston rings due to heat can easily cause compression leaks, oil rises and abnormal wear, but Gulf 911 reduces the incidence of these with its excellent heat resistance. • The Gulf 911 15w-50 is an engine oil that gives an excellent engine response in the entire rotation range, allowing you to feel exhilaration, stimulation of the run, speed, and the sense of unity between the car with pleasant tension.
Other versions available for the part:
GULF 911 OIL 15W50
4 LITRES
GULF RACING 10W60 OIL
4 LITRES
OIL FILTER
RED OIL FILTER AS ORIGINALLY MOUNTED
B&B OIL COOLER FAN KIT 1965-2009
Set of 4 reinforced oil return tubes, 911 65-94 enhanced cooling
SET OF 4
Telescopic aluminium oil return tube set of 4
SET OF 4
Telescopic aluminium oil return tube, sold individually, 911 65-98
ONE
Round seal
CENTRAL
Round seal
EXTERIOR
TELESCOPIC OIL RETURN KILL CIRCLIPS
Oil gallery
UPPER
OIL COOLER THERMOSTAT
Kn sports air filter
Kn air filter cleaner
Servicing oil for kn air filter
Jr sports air filter
Cleaning and servicing kit for jr air filter
Carbon air filter inlet pipe, cup style, 964
Direct inlet kit
DIRECT INLET KIT
Engine oil classic 10w-60
1 LITRES
GULF RACING OIL 10W60
1 LITRES
Engine oil classic 10w-60
5 LITRES
GULF 911 OIL 15W50
1 LITRES
GULF 911 OIL 15W50
4 LITRES
GULF RACING 10W60 OIL
4 LITRES
BAG
Sticker
Tag
1 LITRES
FUEL CAP IN ALUMINIUM LOOK
TANK CAP - ALUMINUM
ALUMINIUM
Service kit containing (the 3 filters + drain plug seal + spark plugs + rocker cover gaskets with fastenings)
TIMING CRANKCASE COVER KIT
PAIR / SILVER / SILVER / ALUMINIUM
Aluminium camshaft gear, competition version
INTERMEDIATE SHAFT SPROCKET ALUMINUM COMPETITION VERSION
Set of seals
Set of seals
Rocker cover gasket kit with fastenings
High strength forged connecting rods (full set)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM
HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / REINFORCED CONNECTING ROD SCREWS STANDING UP TO ENGINE SPEEDS OF OVER 8,500 RPM
High strength forged connecting rods (full set)
Crankcase
Competition valve spring kit
COMPLETE KIT
Titanium upper valve spring cup
ONE
Reinforced lower valve spring cup
ONE
Rocker arm
Bush
UPPER ROCKER COVER
PAIR / SILVER / SILVER / ALUMINIUM
KIT OF 12 RSR STYLE ROCKER ARMS 911 65-94
COMPLETE KIT
Left sports camshaft 911 78-94 911 964 / 993 mechanical rocker assembly
LEFT
Right sports camshaft 78-94 911 964 / 993 mechanical rocker assembly
RIGHT
Racing camshaft
LEFT
Racing camshaft
RIGHT
Complete sports camshaft kit (camshafts + reinforced springs + titanium upper cups + reinforced lower cups)
Camshaft cap on camshaft support, 911 964 993, per cap
Rsr left camshaft 911 964 78-98
LEFT
Rsr right camshaft 911 964 78-98
RIGHT
GENERATION EV1/EV6 INJECTOR CONNECTION KIT
TUBULAR MOTOR SUPPORT
Engine sound absorber
Kit for removal of engine surround plate 964 993 3.6-3.8 colour amber (3 parts)
SPORTS ENGINE COVER KIT
Sports engine cover kit (2 parts) amber 964 993 3.6 + 3.8
Firing sequence label
Sticker
Ignition box preparation
COMPLETE ASSEMBLY KIT FOR PMO CARBURETTOR
46/38 MM
COMPLETE ASSEMBLY KIT FOR PMO CARBURETTOR
46/40 MM
Complete assembly kit for pmo carburettor 50mm
50/41 MM
COMPLETE ASSEMBLY KIT FOR PMO CARBURETTOR 50MM
50/43 MM
INTAKE MANIFOLD SET, CARBURETOR OR MFI 40X32MM, STANDARD HEIGHT (82MM), RENNSPORT FINISH
40x32x82 MM
INTAKE MANIFOLD SET, CARBURETOR OR MFI 40X37MM, HIGH VERSION (100MM), RENNSPORT FINISH
40x37x100 MM
INTAKE MANIFOLD SET, CARBURETOR OR MFI 46X39MM, HIGH VERSION (100MM), RENNSPORT FINISH
46x39x100 MM
INTAKE MANIFOLD SET, CIS INJECTION 46X35 MM, STANDARD HEIGHT (82 MM), RENNSPORT FINISH
46x35x82 MM
INTAKE MANIFOLD SET, CIS INJECTION 46X38 MM, STANDARD HEIGHT (82 MM), RENNSPORT FINISH
46x38x82 MM
INTAKE MANIFOLD SET, CIS INJECTION 46X39 MM, HIGH VERSION (100 MM), RENNSPORT FINISH
46x39x100 MM
INTAKE MANIFOLD SET, CIS INJECTION 46X40 MM, STANDARD HEIGHT (82 MM), RENNSPORT FINISH
46x40x82 MM
High output oil pump with double strainer
Extra-rigid resilient mount for engine
RIGID RESILIENT MOUNT FOR ENGINE
Engine mounting
ONE / Original Mounting / montage origine
ENGINE MOUNTING
Adaptive / adaptable
Kit of sport connecting rod screws and nuts, 40% stronger
VERY HIGH STRENGTH CYLINDER HEAD STUD KIT COMPETITION
Reinforced rocker cover
LOWER
Kevlar cup element replacing electric fan and motor
Other diagrams in the family « Engine and fuel feed »
Engine and fuel feed
Our brands
