Diagram « Camshaft driving mechanism / timig chain » for Boxster / 986 • 1999 • Boxster 2.5 • Cabrio • Manual gearbox, 5 speed
INLET / CYLINDER 4-5-6
EXHAUST / CYLINDER 4-5-6
2 Versions available for this part
18.77 X 1.78 MM
2 Versions available for this part
3 Versions available for this part
2 Versions available for this part
INLET / CYLINDER 1-2-3
2 Versions available for this part
2 Versions available for this part
EXHAUST / CYLINDER 1-2-3
In the same category:
WITH QUICK-RELEASE FASTENER
WITHOUT QUICK-RELEASE FASTENER
EXHAUST / CYLINDER 4-5-6
EXHAUST / CYLINDER 1-2-3
INLET / CYLINDER 4-5-6
INLET / CYLINDER 1-2-3
ENGINE OIL DRAIN VALVE
STAINLESS STEEL OIL PAN DEFLECTOR KIT
OIL COOLER THERMOSTAT
Kn sports air filter
Kn air filter cleaner
Servicing oil for kn air filter
Jr sports air filter
Cleaning and servicing kit for jr air filter
Direct inlet kit
ENGINE OIL CLASSIC 5W-50
1 LITRES
Engine oil mobil1 0w40
1 LITRES
GULF OIL FORMULA G 5W40
1 LITRES
GULF RACING OIL 5W50
1 LITRES
ENGINE OIL CLASSIC 5W-50
5 LITRES
Engine oil mobil1 0w40
5 LITRES
GULF FORMULA G 5W40 OIL
5 LITRES
GULF RACING 5W50 OIL
4 LITRES
GULF FLAT OIL 4 - 6 5W50
4.5 LITRES
BAG
Fuel tank cap
PLASTIC
OVERHAUL KIT BOXSTER 986 2.5L 1997 - 1999 WITH AIR CONDITIONING AND PARTICULATE FILTER WITH ACTIVATED CARBON
OVERHAUL KIT BOXSTER 986 2.5L 1997 - 1999 WITH AIR CONDITIONING AND PARTICULATE FILTER WITHOUT ACTIVATED CARBON
OVERHAUL KIT BOXSTER 986 2.5L 1997 - 1999 WITHOUT AIR CONDITIONING AND PARTICULATE FILTER WITH ACTIVATED CARBON
OVERHAUL KIT BOXSTER 986 2.5L 1997 - 1999 WITHOUT AIR CONDITIONING AND PARTICULATE FILTER WITHOUT ACTIVATED CARBON
Modification kit for intermediate shaft lubrication
Repair kit for intermediate shaft bearing
Tool kit for replacing ims bearings
Intermediate shaft bearing
14 MM
Intermediate shaft bearing
20 MM
SET OF SEALS
Gasket set
LINE BUSHES (FULL SET)
INTERIOR MEASUREMENT -0.25 / EXTERIOR MEASUREMENT STANDARD / COMPLETE KIT FOR A VEHICLE
LINE BUSHES (FULL SET)
INTERIOR MEASUREMENT -0.50 / EXTERIOR MEASUREMENT STANDARD
CONROD BEARINGS SET
REPAIR MEASUREMENT -0.25 MM / COMPLETE KIT
CONROD BEARINGS SET
REPAIR MEASUREMENT -0.50 MM / COMPLETE KIT
HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM
HIGH STRENGTH FORGED CONNECTING RODS (FULL SET)
CARRILLO MAKE / NON-REINFORCED CONNECTING ROD SCREWS FOR ENGINE SPEEDS NOT EXCEEDING 8,500 RPM
POLYURETHANE INSERT FOR ENGINE MOUNTING
POLYURETHANE RESILIENT MOUNT FOR ENGINE CONSOLE
Preparation boxster box
VERY HIGH STRENGTH CYLINDER HEAD STUD KIT COMPETITION WITHOUT DIRECT INJECTION
Other diagrams in the family « Engine and fuel feed »
Engine and fuel feed
Our brands
