VERY HIGH QUALITY PUSH ROD KIT for 356 pré-a • 1953 • 1300 (506) • Coupe pré a • Manual gearbox, 4 speed
-
Reference :
P555936
-
Series selected :
356 pré-a
-
Model selected :
1953 - 1300 (506)
-
Section :
Engine and fuel feed > Rocker cover / camshaft / rocker arm / rocker arm shaft
-
Recommended :
1
-
Weight :
0.46 kg
-
Other :
COMPLETE KIT FOR A VEHICLE
-
Comments :
We are pleased to provide new push rods of the highest quality. Also suitable for racing engines running at high speeds. Much stronger aircraft type alloy material (AA2124 T851) much lighter to keep the reciprocating mass to a minimum, thin to ensure that they do not touch the oil return tubes. (Some initial B push rods had that problem) The standard length is 256.7 mm (10.106"), The standard length is suitable for ALL 356 engines, whether the cylinders are made of cast iron or alloy! Many of the older push rods are slightly bent and the oil ways are blocked up. For any thorough complete engine rebuilds, the push rods have to be replaced.
Housing with roller
OIL PUMP COMPLETE
KIT OF OIL PUMP PINIONS 356 PRE A 2-PART ENGINE BLOCK
Engine radiator installation kit 356 +356a + 356b
Telescopic push rod repair tube
OIL PRESSURE KIT 356 PRE A 2-PIECE SUMP
OIL COOLER THERMOSTAT
AIR FILTER KN 356 FOR ZENITH 32 CARBURETTOR
AIR FILTER KN 356 PRE-A + A FOR SOLEX 32 CARBURETTOR
Kn air filter cleaner
Servicing oil for kn air filter
BAG
FUEL PUMP
6 VOLT
FUEL PUMP
12 VOLT
FUEL PUMP 6 VOLTS 356
6 VOLT
Hardi 6v 356 fuel pump
6 VOLT
Fuel tank
80 LITRES
FUEL TANK STRAP
PAIR
OPENING FOR FUEL TANK STRAP
FUEL CAP SEAL 356 356A 356 5-SPEED BOX BLUE AS ORIGINAL
Sealing ring
LITRE FUEL GAUGE WITH LEATHER COVER 356
Kit to prevent unwanted variations in the fuel gauge readings
Fuel hose
SOLD BY THE METRE / 3 MM
Fuel hose
SOLD BY THE METRE / 4 MM
Fuel hose
SOLD BY THE METRE / 7 MM
Fuel hose
SOLD BY THE METRE / 8 MM
Fuel hose
SOLD BY THE METRE / 9 MM
Rubber grommet for fuel pipe 356 all
Set of seals
Set of seals
High strength forged connecting rods (full set)
CARRILLO MAKE
ENGINE BLOCK / CYLINDER HEAD STUD, SET OF 16
CAMSHAFT
CAMES DE 32 MM / 32 MM
CAMSHAFT
CAMES DE 33 MM / 33 MM
CAMSHAFT
CAMES DE 34.5 MM / 34.50 MM
CAMSHAFT
CAMES DE 35 MM / 35 MM
VERY HIGH QUALITY PUSH ROD KIT
COMPLETE KIT FOR A VEHICLE
BREATHER HOSE
BREATHER HOSE
Repair kit zenith 32
Repair kit solex 32
Repair kit solex 40pjcb
WEBER CARBURETOR KIT TO REPLACE SOLEX 40PII, COMPLETE WITH INTAKE ADAPTERS
WEBER CARBURETTOR KIT TO REPLACE ZENITH 32NDIX, COMPLETE WITH INTAKE MANIFOLDS
ENGINE COMPARTMENT INSULATION KIT
PROTECTIVE CASING UNDER ENGINE 356
ENGINE PLATE SCREW KIT 356 912
ENGINE PLATE WASHER 356 912
REPAIR KIT FOR 356 ENGINE PREHEATING VALVE
"einlass" transfer for fram filter grey background 356 (capital letters)
TRANSFER
Decal label
TRANSFER
Fram oil filter transfer on top and at centre
TRANSFER
H-filter oil filter transfer on top, in front, and at centre
TRANSFER
Lateral fram oil filter transfer 356 52-57
TRANSFER
MANN TRANSFER 356 INITIAL VERSION
Transfer for mann oil filter 356 (set of 2)
TRANSFER
Valve clearance image transfer 356 normal + super +c + 912
Valve clearance label 356 initial versions 1300 +1500
Jorg sticker for screwdriver, 356a-bt5
12 volt sticker for 356 with 12 volt option
Other diagrams in the family « Engine and fuel feed »
Engine and fuel feed
Our brands
